home *** CD-ROM | disk | FTP | other *** search
- Path: news.mindlink.net!news
- From: brad_barnett@mindlink.bc.ca (brad barnett)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: Does A2091 Rev6.6 work in 68000 A2000 Rev 6.2 ???
- Date: 21 Feb 1996 22:49:58 GMT
- Organization: MIND LINK! - British Columbia, Canada
- Message-ID: <999.6625T642T1112@mindlink.bc.ca>
- References: <4ga9a9$1269@deimos.rz.uni-osnabrueck.de> <4gdqe4$4bj@news.Informatik.Uni-Oldenburg.DE>
- NNTP-Posting-Host: line319.nwm.mindlink.net
- X-Newsreader: THOR 2.22 (Amiga;TCP/IP)
-
- >hufer@yamato.physik.Uni-Osnabrueck.DE (Hartmut Ufer) writes:
-
- >>As I already mentioned in the subject I would like
- >>to hear from other users if they have problems with
- >>autobooting from a A2091 Rev4.1, BIOS Rev. 6.6 plugged
- >>into a plain A2000 Rev 6.6 board? I would like to
- >>know this because I always get a Guru 00000003.00C057C8
- >>during the autoconfig phase.
-
- > ich habe eine A2091 in meinem a2000 V6.2
- > keine probleme.
-
- >--
- >-----
- >"Blowing the occasional chunk out of the earth keeps them amused."
- >-----
-
-
- Hi,
- Try booting without a hard drive connected. If this works, it could
- be the boot partition of the hard drive is causing a guru. I (on several
- occasions) have noticed that taking such a drive, and putting in onto a system
- with a Rev6 or Rev 8 SCSI chip, can then be validated, and put back on the
- 2091 with the older SCSI chip. Of course, if it just guru's, without a drive
- connected, this isn't the problem.
-
-
-
- Brad Barnett - brad_barnett@mindlink.bc.ca
-
-